VPS SSD – IPv6 Addresses

  Virtual Servers (VPS SSD)

This tutorial deals with adding IPv6 addresses to a VPS SSD server. Instructions for adding IPv6 addresses to VPS ON can be found in the article VPS ON – IPv6 Addresses.

In this article, you will learn:

IPv6 na VPS SSD

VPS SSD servers are assigned two IPv6 subnets by default: one in the /64 range and the other in /48. By default, one IPv6 address is already enabled in the administration panel.

The administration panel does not forward information about the enabled IPv6 addresses to the server in any way. You set them manually on your operating system’s network interface.

Enable IPv6 in Customer Administration Panel

By default, one IPv6 address is allowed in the VPS SSD service administration panel.

Follow these steps to manage enabled IPv6 addresses:

  1. Log into the customer administration panel.
  2. In the navigation bar, select Serverové Hosting VPS SSD.
  3. Select the service whose IPv6 addresses you want to modify from the list.
  4. In the left menu, click Enabled IPv6.
Interface for enabling VPS SSD IPv6 addresses

In this interface, you can add and remove allowed addresses.

New IPv6 Address

To enable a new IPv6 address in the management interface of the enabled IPv6 addresses, follow these steps:

  1. In the Assign IPv6 Address section, select an IPv6 subnet prefix.
  2. Enter the rest of the IPv6 address in the box next to the prefix.
  3. Complete the Captcha.
  4. Click the >> button to add the IPv6 address.
  5. In the service detail, turn the VPS off and on again.
WEDOS Enabling a sample VPS SSD IPv6 address
Enabling a sample VPS SSD IPv6 address

Finish enabling the address by turning the VPS off and on again in the administration panel (normal restart is not enough).

Now you can also activate the enabled IPv6 address on the network interface according to the guide for you OS.

FAQ

Question: How do I get an IPv4 address for my VPS SSD?
Answer: For VPS SSD, and IPv4 address is an add-on service.

Děkujeme za zpětnou vazbu!